 | ||||||
Mounting Bracket Assembly Extension Tube Progressive Divider Push in fittings Empty and Prefilled Tubing
| ||||||
125cc: 091mm(3.6") x 183mm (3.6")
250cc: 091mm(3.6") x 210mm (8.2")
500cc: 092mm(3.64") x 261mm(10.2")
NOTE: Technical information is subject to change without notice.
125cc: 860g (1.89 lb.)
250cc: 1050g (2.31 lb.)
500cc: 1300g (2.86 lb.)
Direct Straight/Angle Mount
(with or without extension tube)
is always preferable,. However for applications not allowing direct or extension mounts,
remotely mount the unit using a 6mm O.D. prefilled lube line.
Remote Multi Point Lubrication
is available with the Technolube M using a divider block. It is recommended to test the back pressure pf the bearing, lube line, and divider block after assembly using a grease gun connected to a pressure gauge. Ensure the break-off pressure is below the average operating pressure of 30kgf/cm2 (425psi).
Shelf Life and Product Warranty.
The shelf life of each Technolube M unit is 2 years from the date of production. Product warranty is limited to original defects in materials and workmanship and will not cover any collateral damage due to mishandling, abuse and/or any other inappropriate use of the product. Warranty period is 1 year from the date of purchase.
MSDS. Available for the Energizer batteries used and stock Mobil Unirex greases on request. We can provide MSDS for most other greases you may require. The M series units have no other possibly hazardous content.
| ||||||
M series Refillables TL-M1 125cc, TL-M2 250cc, TL-M3 500cc.
Our M series mechanical lubricators will display the following where
applicable:
The number of days until empty;
The number of days on empty;
Back pressure warning icon;
Number of days in back pressure mode;
Digital readout;
Low grease icon.
Bracket and fittings Extenders Progressive Divider Push-in Fittings 6mm Tubing .
Daily dispense rates chart on the Comparison Chart page.
