 | ||||||
Models TL-M1 125cc TL-M2 250cc and TL-M3 500cc, also MEX models.
Included in the price of the initial unit - the installed service pack (grease pouch
waterproof cover and batteries) - ready to go.
Electro-mechanically controlled, these units can be used as single point lubricators OR with a divider block to supply up to eight bearings. Setting is simple with the large digital display.
All are refillable with a service pack available containing all necessary replacement parts, including the grease pouch prefilled with your grease of choice. Almost any grease or lubricant can be used. The grease pouch and batteries are RECYCLABLE when empty and replaced by the new service pack refills.
An additional advantage for colder regions - with the optional Lithium Battery Pack the unit will operate at -40 degrees C.
Pouch
Spring
Pouch
Plate
Grease
Pouch
Housing
LCD
Main Body.
Piston
Motor
Gear
Set
Worm
Gear
Connecting Thread
3/8" BSPT
The dispensing period
setting.
The # of days remaining until the end of lube cycle.
The unit is in Automatic
Lock Out mode.
# of days after dispensing has completed.
# of days on stand-by mode due to excessive backpressure.
Excessive backpressure exists.
Low battery power.
.Empty grease level.
Signal lamp blinks when battery power is low, excessive backpressure exists, or grease level is empty
Deactivate "Automatic Lock Out" by pressing the MODE/ LOCK button until the lock icon disappears
Press the POWER button for 2 seconds to turn unit on and off.
Run a test cycle by pressing the TEST button for 2 seconds
Reset the unit if it malfunctions and/or after changing the service pack.
Select grease pouch capacity
Test mode is activated.
LCD DISPLAY FUNCTIONS
These electro- mechanical refillables can be installed directly to the bearing but if vibration is present they perform best with a bracket and tubing up to 3 ft. away.
LCD DISPLAY FUNCTIONS
For daily dispense rates see Comparison Chart page.
