 | ||||||
TL-MEX Electro Mechanical, Refillable Unit for Hazardous Locations
Operating Principle
Technolube MEX is an eco-friendly, single-point lubricator that can be reused by replacing only the grease and battery pack. Like the M series, MEX is designed with a user friendly setting system so that the dispensing rate can be adjusted for optimal lubrication.
The circuits and parts are designed based on an energy limitation concept, using a non-sparking, explosion-proof structure to prevent an electrical device from igniting gases whether working under normal or certain abnormal conditions.
The Technolube MEX design has been tested by UL labs and meets the following requirements:
UL79, Power-Operated pumps for Petroleum dispensing products,
Eighth Edition ANSI/ISA-12.12.01-2000, Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous locations.
TL-MEX1 - 125cc
and
TL-MEX2 - 250cc
Setup and settings for these units are the same as those for the M series, with the exception that MEX is for single point use only.
